Find Positive Displacement Glue Pump, Gear Positive Pump, Internal Gear Positive Glue Pump on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
New Products
| Payment Type: | L/C,T/T,Paypal,Western Union |
|---|---|
| Incoterm: | FOB,CFR,CIF,FCA |
| Min. Order: | 1 Piece/Pieces |
| Delivery Time: | 3 Days |
Model No.: NYP
The high viscosity pump suction pipe elbow cannot too much (not more than 2).If the inlet pipe elbow is more, the serious influence of pump suction.That is no more than pump NPSH.If the entrance of the pump suction pipe is too long or more elbow, reduce the suction pump.There will be a pump discharge, the phenomenon such as insufficient pressure.
Debugging high viscosity pump,( 56711580,1) pay attention to the speed reducer and 70 limit of industrial gear oil, oil can't exceed standard scale.Reducer oil too much, as the operation of the machine, gear box temperature, can produce vacuum phenomenon, leakage of oil will go toward outside.(2) off the motor of wind cover, and then hand turning motor wind 360 degrees without card points.Confirm the identity of the motors pump, reducer concentricity, if different heart, please adjust the pump and motor concentricity.
Pump's specification:
Model Capacity(L/H) Pressure(Mpa) Diameter(mm)
Speed(rpm) Motor Power(KW) NYP0.78 0.5 0.8 15 960 1.5 NYP3-1.0 2 1.0 40 587 3 NYP10-1.0 6 1.0 50 228 7.5 NYP10-1.0 8 1.0 50 303 7.5 NYP10-1.0 10 1.0 50 357 7.5 NYP10-1.0 12 1.0 50 475 7.5 NYP30-1.0 18 1.0 80 305 15 NYP30-1.0 22 1.0 80 359 15 NYP30-1.0 28 1.0 80 479 15 NYP50-1.0 50 1.0 150 128 37 NYP50-1.0 80 1.0 150 208 45 NYP50-1.0 100 1.0 150 253 55
Pump to debug.Note: upon confirmation of steering pump, please with the hand points to move power supply control switch 1 to 2 times, look to whether consistent with arrows to pump mark.Please correct the power connection mode.
Above, check first to open the pump inlet valve and outlet valve of the pump.Such as pump discharge bypass, please close all the bypass. After waiting for the material into the pump, start the pump. Note!Import and export of avoid by all means the valve open did not start the pump, this pump can pressure-out.Serious cause pump body break.The consequence is proud.
To start the pump, inching power supply control switch 1 to 2 times, the pump start directly after normal rotation.
Pump running normally, debugging is completed.
Pump's pictures:
Botou Honghai Pump Co., LTD. Is a professional manufacturer specializing in developing and manufacturing various high viscosity pump , heat insulation pump , screw pump , asphalt pump , gear pump , stainless steel pump , high temperature pump . rotor pump , hose pump , and centrifugal pump.
Products are widely used in the national petroleum, chemical, shipping, electricity and other fields.
Our company has a perfect production system and quality assurance system, won the trust of domestic and foreign customers.
Contact US:
Product Categories : Rotor Pump > Heat Preservation Rotor Pump
